|Horse Power||2-4 HP|
|Vibrating Table Size||3000 x 830 x 900 mm (L x W x H)|
|Total Length||8000 mm|
|Maximum Size of the Tile||600 x 600 mm|
|Maximum Height of the Tile||100 mm|
|Rubber Mould Weight||600 Kg x 2 Approx|
|Production Capacity||2000 sqft per shift for interlock , 2500 sqft. per shift for tiles|
This model is a very much handy in construction arena The tiles of various thicknesses with rich colour & design adding attractiveness. long lasting Richness to interior and exterior floorings and wall face can be made using the model.
In this process high slump concrete (highly flowing concrete) is poured in to the rubber moulds and compacted in vbro forming vibrating tables.
The moulds with green concrete are kept for initial strength gaining upto 8-12 hours over flat plate. Then the cart concrete tiles are stripped out from the rubber moulds. This wet ties are then kept in controlled atmosphere for 3 days to gain further Self Strength
Polyurethane or varnish coatings can be applied for added attractiveness & wear resistance. By handling carefully the rubber moulds can be reused more than 600 times after washing.
Attractive long lasting color faces can be formed by pouring white cement concrete with color pigments first and then regular ray concrete next, economically with two layers.
The high slump face concrete mix is to be mixed in separate exclusive be mixer. The base gray concrete mix can be mixed with another the meet or regular drum type concrete mixer. Any architectural design (natural stone, wood grains etc) can be duplicated in the tile face with the rubber moulds.